![background image](http://html1.mh-extra.com/html/elsner-elektronik/60121/60121_installation-and-operation-manual_2396633044.webp)
43
Automatic settings
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Press the button to set the movement position for a sliding window in automatic mode.
The window can also be fully opened by hand.
With the arrow keys, specify the movement position in % (0% = closed, 100% = fully
open). Default setting: 75%.
Confirm your setting with the
OK
button.
Press the button to set the number of movement steps for a step window in automatic
mode. With step windows the control unit checks every 3 minutes whether the set
room temperature or air humidity has been exceeded and then moves up another step
if necessary.
Specify the desired number of steps with the arrow keys. Default setting: 5.
Confirm your setting with the
OK
button.
Press the button to set the times for night-time re-cooling. The button is only activated
once the general settings for night-time re-cooling have been configured.
System > Automatic Settings > General Settings > Night-time Cooling
3.3. Set night-time re-cooling
Press
Select
to select the time during which the night-time re-cooling will operate. Ac-
tivate one or more periods on the list.
Confirm your setting with the
OK
button.
To change any of the time periods, press
Timer
.
3.3. Set timer
Be careful that your settings for timed closure do not prevent night-time re-cooling op-
erations!
Press the button to set the indoor temperature to the desired cooling level (for the
night-time re-cooling). The button is only activated once a night-time re-cooling period
has been set.
Use the arrow keys to change the value as required. Default setting: 16.0°C.
Confirm your setting by pressing
OK
.
Movem. Position
Only for sliding windows.
Number of steps
Only for step windows.
Night-time cooling
NTC Indoor Temp.