![background image](http://html1.mh-extra.com/html/elsner-elektronik/60121/60121_installation-and-operation-manual_2396633108.webp)
107
Basic Setting
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Double buttons
(unlocked serial buttons) are allocated the function of the
But-
ton
. If, in these settings, the button is allocated the shading and/or window functions,
then the button has its own internal timer, i.e. a short pressing of the button works ac-
cording to the "dead man's principle": if pressed for longer (> 1 second), the drive trav-
els up to the end position (self-stop mode).
If such a double button is allocated a switchable device (lighting, heating, etc.), then
the Up button switches on and the Down button off.
The external button settings can be accessed by pressing the buttons:
You can now select individual buttons from the list and adjust their settings. So long
as no settings have been completed yet, the buttons will show (
Ext. Button 1
), (
Ext.
Button 2
) etc. If a button was already configured, the name or function will appear in-
stead. Press the key of the button to be set.
For each external button the following settings can be changed:
Input type
Press the
Reserve
button. A selection menu appears. Select
Button
(if a double
push button is connected) or
Button
(if a single push button is connected) or leave
“
Reserve
”, if the button input is not being used for the moment.
Confirm your selection with the
OK
button.
Button direction
Press Settings to adjust the direction of an up/down button. No button direction is
needed for single buttons.
The directional test menu appears. Press the button’s up and down keys. This activates
the arrows in the display. If the direction of the button matches the display, leave the
setting at
Normal
. Otherwise press the button
Invert
. Now button and display should
match.
Confirm your setting with the
OK
button.
Installation
Ext. Button
System
Reserve
Settings