![background image](http://html1.mh-extra.com/html/elsner-elektronik/60121/60121_installation-and-operation-manual_2396633104.webp)
103
Basic Setting
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Now you can select individual drives (or drive groups) from the list and adjust their set-
tings. So long as no settings were completed yet, the buttons show (
Drive 1), (Drive
2)
etc. If an output was already configured, the name of the drive will be displayed in-
stead.
Press the button of the drive to be set. For each drive the following settings can be
changed:
Drive type
Press the Reserve button. The possible drive types appear (awning, window, step win-
dow, sliding roof, blinds, shutters, sliding door). Select as appropriate. If the connec-
tion is not being used for the moment, leave
“Reserve”
.
Confirm your selection with the
OK
button.
With the buttons
A
and
B
you can test the motor function. Please also determine the
movement times
to complete opening/extension or closing/retraction (stop watch).
Also determine the time for reversing of the slats for blinds, that means the time it
takes to reverse completely from closed position to the other end point. You need
these values for the setting "movement times" (see below).
ATTENTION
Rain and wind alarms are deactivated while this menu item is shown!
Name
Press the button to change the name (by default its name is the selected drive type).
Enter the desired name via the keypad that appears.
2.4. Input keyboard for names and codes
Confirm your input with the
OK
button.
Reserve
Name 1