105
Basic Setting
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Press the button if the output shall be used as the central command for motor control
devices.
Select
Yes
to drive motor control devices (e.g. IMSG 230) using the drive output. The
relay stays closed permanently during a rain or wind alarm.
If a single drive or a group of drives is connected on the drive output, leave the default
settings
No
.
Confirm your selection with the
OK
button.
Please note that for windows where MSG control is selected, the “Gap ventilation dur-
ing rain” function is not possible.
3.2. Automatic window settings
Press the button to select the canvas tightening for awnings. Only select
Yes
(tighten
canvas after reaching the movement position), if the installed awning is suitable. The
drive time for canvas tightening is 1 second.
Confirm your selection with the
OK
button.
Press the button to adjust the slat turning for blinds. Turning the slats is for example
recommended with shutters which are installed between glass panes. Slats in this in-
stance can get caught together when moving the curtains. Turning the slats sorts them
and sets them to the neutral position.
Never turn: Setting for most indoor and outdoor shutters.
Turn when shading: The slats are only turned during automatic shading.
Turn after every movement: The slats are turned during automatic shading, during
night-time and timed closure and during manual closure without stopping (end posi-
tion).
The slats are normally only turned after extending the blind. They are
not
turned at a
manually reached intermediate position (stop pressed).
Confirm your selection with the
OK
button.
Press the button in order to assign a drive to a safety contact. The contacts are connect-
ed to the MF inputs. If the safety contact is opened, then the drive will advance to the
safe position (window closes, shade retracts) and manual operation is blocked.
MSG Control
Canvas Tightening
Slat Turning
Safety Contact
