7
CAUTION! Misuse of this equipment specified by the manufacturer may
damage the metal detector or injure people.
Technical Specifications:
Electrical
: 70 – 270 VAC (Electricity power supply should be earthed & stable)
10 Watts standby, 20 Watts max in alarm. A-Class Energy Save
Frequency: 50/60 Hz
Maximum Relative Humidity : 95% non-condensing
Operating Temperature
: -20° ~ +70º C
WARNING:
If the
ThruScan
Metal Detector will be controlled from a distance via SRC-SCADA
Remote Control software on a PC, both the PC and the metal detector must be earthed
at the same power line. Otherwise issues causing breakdowns may occur.
Standards:
The units comply with NILECJ L/1-3 standards
ThruScan
is within the magnetic emission limits approved by FDA (American Food & Drug
Administration). It has been certified by experts that has no effects on living creatures, cardiac
pacemakers, pregnant women as well as magnetic media. A “report of expertise” on this issue is
presented in Appendix-1. See Section 10.1.
Protect your
ThruScan
from direct rain, mist and/or condensation and place it on a stable, vibration
free floor.
DO NOT place the
ThruScan
close to telephone lines, television monitors, electric motors,
transformers, power cables, or control circuits; excessive electrical noise may cause false
measurements.
CAUTION!
ThruScan
has to be firmly fixed to the floor to reduce the risk of accidentally
falling over and injuring people or causing damage.
Do not drill holes into the side panels under any circumstances!
The walk through metal detector is ready to use once the green “ready LED” (Light Emitting Diode)
light is on.
Test your apparatus periodically, especially when physical environmental displacements have
occurred around it.
NOTE:
Security metal detectors have been designed to be used within a
comprehensive security-screening plan. It is the user’s responsibility to define
the area coverage the overall plan and ensure that it operates effectively.
