52
A special connection cable is provided by the producer along with the Remote Control SCADA
Software. Plug in the appropriate end of this cable to the socket explained in Section 3.7 and the
other end to the Communication Port of your computer (COM).
You may also use BUS Network or the Star Network as the Communication Technology.
An example is explained in the picture below. You may learn the details about the programming
from Section 10.2. Also See Sections 3.7, 6.13, 10.2
It is also possible to utilize separate cables for each
ThruScan
* I want to operate my WTMD through a standard telephone line using the Remote
Control SRC-SCADASoftware. How should I make the connection?
You may operate and/or make the adjustments of your WTMD from anywhere around the world
using
a
standard telephone line as cable or satellite connection (GSM or THURAYA). The accessory
necessary for this process is a modified modem and a special connection cable prepared by the
factory. One end of the connection cable consists of a 25 dSUB (See 7.1.2 for modem) and the
other end is in the shape of a standard telephone connector (for
ThruScan
see 3.7).
If the control of more than one WTMDs would be made by means of this line than there should be
a connection as shown below or each connection cable taken from the WTMD separately should be
brought where the modem will be used.
It is explained in details in Section 10.2 how to make a connection between
SRC-SCADA
software
and
ThruScan
.
STAR NETWORK
(S3/s9; 16 pcs – sX; 99 pcs)
BUS NETWORK
(S3/s9; 16 pcs – sX; 99 pcs)
