Elektral ThruScan s15-i Скачать руководство пользователя страница 51

Страница: 51 / 61

parties agree that the final place of overhaul is the official premises of Elektral® in Izmir-Turkey-

Ataturk Industrial Zone and the transport costs or the travel costs of technicians are not beard by

Elektral® himself. (see Section 10.5)
This Warranty does not cover batteries nor any and all failures caused by abuse, tampering, theft,

failure due to weather, battery acid or other contaminants and equipment repairs made by an

unauthorized party.

This warranty is expressly in lieu of all other warranties, expressed or implied,

including the warranty of merchantability or fitness for a particular purpose.

The Buyer acknowledges that any oral statements about the merchandise described in this contract

made by Seller’s representatives, if any such statements were made, do not constitute warranties,

shall not be relied upon by the Buyer and are not a part of this contract for sale or delivery. The

entire contract is embodied in this writing. This writing constitutes the final expression of the

parties’ agreement and is a complete and exclusive statement of the terms of this agreement.

The parties agree that the Buyer’s sole and exclusive remedy against Seller shall be for the repair

and replacement of defective parts. The Buyer agrees that no remedy (including, but not limited to,

incidental or consequential damages for lost sales, lost profits, injury to person or property) shall be
available to him.

Service Station:

Elektral Elektromekanik San. Ve Tic. A.S.
Izmir Ataturk Industrial Zone, M.K. Ataturk Blv. 23 Cigli

35620 Izmir -TURKEY
Phones: +90(0)232 376 7300 Fax : +90(0)232 376 7030

e-mail : [email protected]

9 TROUBLESHOOTING

You may find the answers to your basic questions related with the mounting and

operation of your WTMD in this section.

9.1 Frequently Asked Questions

9.2 Installation Problems

9.3 Operational Problems

9.1 FREQUENTLY ASKED QUESTIONS

* Is technical personnel necessary for the mounting of the WTMD?

Mounting and dismounting this WTMD is very easy. The user can easily set it up and use it.

Following the instructions in the manual step by step the mounting can be performed. Its design

prevents false mounting. The male and female connectors are matched individually. Therefore the

risk of false connection is minimized.

*There is NOT a proper GROUND at the mains. What should I do?

Never use your WTMD through mains without a proper ground. It is hazardous and not possible to

operate WTMD in this circumstance with floating voltages.

* May I or any technical personnel take care of problems occurring by our WTMD?

If problems persist even after the completion of the instructions in the users manual and the

section of solving problems, please contact out ASS-After Sale Services. Interference of

unauthorized people may both cause worse problems with your WTMD and exclude it from the

warranty.

*How many hours a day may I operate this WTMD?

The WTMD is designed for continuous operation of 24 hours.

Содержание ThruScan s15-i






























































Результаты поиска

Содержание ThruScan s15-i

Отзывы:

Похожие инструкции для ThruScan s15-i

Бренды по названию

Популярные бренды

Elektral ThruScan s15-i, Руководство пользователя

Результаты поиска

Содержание ThruScan s15-i

Отзывы:

Похожие инструкции для ThruScan s15-i

Бренды по названию

Популярные бренды