30
4.1.10 NEW PASSWORD
A four digit numerical password –
PIN CODE
(default factory
setting (0000)
secures
ThruScan
’s programming and data. This
password may be changed at any time as follows;
1.
Press
UP&DOWN
buttons until the
NEW PASSWORD
sub
-
MENU option is displayed.
2.
To change the password press
SEL(√)
button and enter
the new password MENU.
3.
Select the 1st digit of the new password by using the
UP&DOWN
buttons – Then press
SEL(√)
.
4.
Select the 2nd digit of the password code by using the
UP&DOWN
buttons–Then press
SEL(√).
5.
Select the 3rd digit of the password code by using the
UP&DOWN
buttons–Then press
SEL(√)
.
6.
Select the 4th digit of the password code by using the
UP&DOWN
buttons–Then press
SEL(√)
.
Press
UP&DOWN
buttons and change to the next
sub
-MENU option
or press
RUN(X)
button to store the changes and thus return to the
normal operating mode.
4.1.11 ENVIRONMENTAL NOISE
This MENU is prepared to measure the electromagnetic noise level of
surrounding and thus help the user to select the sensitivity level
accordingly.
1-
Press
UP&DOWN
buttons until the
ENVIRONMENT NOISE LEVEL sub-
MENU option is
displayed.
2-
Enter the MENU by pressing
SEL(√)
button,
3-
The noise value of the environment will be displayed,
4-
Return to MENU by pressing
RUN(X).
NOTE: People carrying metal objects must not pass through
or near the WTMD while carrying out this process.
A higher value than the threshold noise level should be selected for sensitivity level to
avoid false alarms depending on the users experience and instinct.
MAIN MENU
PASS SENSOR
ALARM DURATION
DATE & TIME
MAIN MENU
NEW PASSWORD
PASS SENSR
ALARM DURATION
NEW PASSWORD
ENTER PASSWORD
****
NEW PASSWORD
****
ENVIR. NOISE
NOISE: 002
