32
“OPERATION DURATION”
menu
2-
Enter Menu by
SEL(√)
button,
3-
Use
UP&DOWN
buttons for Selection
4-
Press
RUN(X)
button to return to normal operating mode.
4.1.15 RANDOM ALARM RATE SELECTION
(*
ThruScan
s15-i/sX-i
only)
With Adjustable Random Alarm Rate feature you can set your
WTMD to Give Alarm with a Different Alarm Tone for persons who
do not carry metal on. Random Alarm Rate can be set between
%0 and %100.
1.
Press
UP&DOWN buttons to find “RANDOM ALARM
RATE”
menu.
2.
Press
SEL(√)
button to enter menu.
3.
Use
UP&DOWN
buttons for Selecting the Random Alarm
Rate
4.
Press
SEL(√)
button to save your settings.
Press
UP&DOWN
buttons and change to the next
sub
-MENU option
or press
RUN(X)
button to store the changes and thus return to the
normal operating mode.
4.1.16 ALARM RATE
(*
ThruScan
sX,
s15-i/sX-i, sX-WP
)
This menu is to Display the Percentage of Alarms generated by
ThruScan
.
Percentage of Alarms is the ratio of Alarms and Persons Passing through the WTMD.
(Alarm Rate = Persons Pass Through WTMD /Alarms Generated).
1.
Press
UP&DOWN buttons to find “ALARM RATE”
menu.
2.
Press
SEL(√)
button to enter menu.
3.
Use
UP&DOWN
Buttons for
Y
(reset),
N
(do not reset) selections;
4.
Press
SEL(√)
button to save your settings.
Press
UP&DOWN
buttons and change to the next
sub
-MENU option or press
RUN(X)
button to
return to normal operating mode.
4.1.17 SELECTING OPERATION CHANNELS
This menu is to select the Operation Frequency of your WTMD. The
operation frequencies have to be different when two or more
WTMD’s are in operation close to each other or when the
electromagnetic noise conditions make it necessary.
MAIN MENU
OPERATION CHANNEL
MAJOR ERROR
SCADA ADDRESS
RANDOM ALARM
%000
5
STATISTICS
ALARM COUNTER
IN OUT
RUN TIME
5
MAIN MENU
MAJOR ERROR
SCADA ADDRESS
PANEL VISIBILITY
RANDOM ALARM
%10
OPERATION CHANNEL
CHANNEL [ 0 ]
ALARM RATE
30%
