28
2.
Counter value stored in the memory will be displayed for both the IN & OUT counters
separately,
3.
To reset the counters press
SEL(√)
button to enter the reset MENU,
4.
Select either
00
(do not reset),
01
(reset the
IN count
),
02
(reset the
OUT count
) or
03
(reset
BOTH COUNTERS
) by
UP&DOWN
buttons,
5.
Press
SEL(√)
button to select and fix the setting.
Press
UP&DOWN
buttons to move to the next
sub
-MENU option or
press
RUN(X)
button to store the changes and thus return to the normal operating mode.
4.1.6.2 FOR;
ThruScan
sX/ sX-WP /s15-i/sX-i
ThruScan
has a traffic counter monitoring both incoming and
outgoing traffic through WTMD thus indicates the number of
persons passing through the unit in both directions after the last
memory “reset”.
The IN&OUT counter values are displayed on the LCD (screen) and
one can compare the difference between the two counters to find
the number of persons still in the building.
The traffic counter memory can be viewed or reset as follows:
6.
Press
UP&DOWN
buttons in
STATISTICS
until the
ALARM COUNTER sub-
MENU option
is displayed,
7.
Counter value stored in the memory will be displayed for
both the IN & OUT counters separately,
8.
To reset the counters press
SEL(√)
button to enter the reset
MENU,
9.
The reset of these values can be done here,
10.
Press
SEL(√)
button to select and fix the setting.
Press
UP&DOWN
buttons to move to the next
sub
-MENU option or press
RUN(X)
button to store
the changes and thus return to the normal operating mode.
NOTE: Please ask people who had metal detected on by the WTMD, to walk back
through the WTMD so that the in & out counters wouldn’t count the same person again
and again. This way, the number or the people inside would be accurate.
Continuous operation & detection can be obtained when IR Pass Sensor LEDs are
obstructed.
4.1.7 FACTORY SETTINGS
ThruScan
can be returned to factory settings as follows:
1.
Press
UP&DOWN
buttons from the MENU until the
FACTORY SETTING
sub
-
MENU option is displayed.
MAIN MENU
SETTINGS
STATISTICS
ALARM RATE
RUN-TIME
MAIN MENU
LANGUAGE
COUNTER VISIBILITY
ENVIRONMENTAL NOISE
FACTORY SETTINGS
STATISTICS
ALARM COUNTER
00000 00000
IN OUT
IN < COUNTER > OUT
00000 00000
ACTIVE = 00
