58
P0-
P9
:
Security Level Adjusts (adjusts between security level “NC” and security level “09”)
:
YES button (to select YES/OK in all above MENUs)
:
NO button (to select NO/REJECT in all above MENUs)
L
:
Language Selection; 1. English, 2. German, 3. Turkish, 4. Spanish
10.4 User’s manual for Wheeled Transportation Accessory /WTMD Wheeler
Operation:
This device is designed as an accessory for the WTMD Models(all)
ThruScan
s3/s9/sX/sX-i/sX-
WP and for transportation purposes only. To use this accessory correctly, make sure that you have
assembled the apparatus properly. The assembled WTMD should be carefully placed into the
transportation accessory and then the item number (h) should be used to fix the accessory by
screwing to the bottom part of the side panels.(Make sure that you are not screwing extremely
tight NOT TO CAUSE ANY DAMAGE ON THE PLASTIC SIDE PANELS) After getting on the WTMD on
the “Wheeled Transportation Accessory”, carefully lay down the WTMD then hold up the both(side
panels) on wheels by firmly holding, slowly ride your WTMD to the new place you want.
Figure 1
Fixing parts for the “Wheeled Transportation Accessory” is shown on this chart below.
Figure 2
Assembled, Wheeled Transportation Accessory for WTMD (all models).
Assembly;
1- Place item number (b) between pieces shown as (a) on the figure 1
2- Item number (c) to be fixed through the hole.
3- Items numbered (d) to be fixed at both ends of the item number (c)
