background image

 

60 

Seal/Signature

 

10.5   CERTIFICATE OF WARRANTY

   

 

 

FULL WARRANTY CERTIFICATE 

 

Your Unit, Model:

.....................................................................................

 

Serial/Model No     :

.................................. 

Which  you  purchased  on  __/__20__  is  hereby  warranted  against  defect  in  workmanship  and 

material for a period as follows: ___ YEARS 

 

1.

 

Within the Warranty period, ELEKTRAL® will repair or replace, without charge, any part or parts 

that prove to be defective. The defective instruments should be returned, accompanied by the 
attached SERVICE OR REPAIR CARD to ELEKTRAL® Izmir Ataturk Industrial Zone M.K. Ataturk 
Blv. 23 Cigli 35620 Izmir-Turkey where the overhaul is performed also. 

2.

 

Upon  expiration  of  the  Warranty,  ELEKTRAL®  A.S.  further  guarantees  to  repair  this 

merchandise at a cost of the current listed ELEKTRAL® price. 

3.

 

This warranty is void if  

 

the instrument has been damaged or broke down through misuse 

 

instrument has been altered or tampered with in any way 

 

instrument has been damaged through accident, misuse or negligence 

 

the seal, ties or stickers on the instrument has been broken 

 

damage or defects occur because of through lightning and fire 

 

replacement or repair is necessitated be loss or damage resulting from any cause beyond the 

control of ELEKTRAL® 

 

the instrument has been used against the instructions stated in the user’s manual 

 

your warranty has not been among our files by your request with “Warranty Information Card” 

 

only ELEKTRAL® A.S.  is authorized to confirm above mentioned particulars.  

 

all price and costs are FOB Izmir-TR.  All the transport or travel costs are bared by the buyer.   

4.

 

ELEKTRAL® is not to be labelled for loss of other damage allegedly resulting from defects in its 
products.  

5.

 

This Warranty gives you specific legal rights. Please Include Model Number and purchase date 
in correspondence regarding this instrument. 

All  Warranty  Services  are  at  our  Factory.  All  transportation  risks  and  costs  to  and  pro  our 
Factory belongs to Customer.  

 

 

 

 
 

 

 

Thank you for selecting a product manufactured by ELEKTRAL® A.S.  Before using your new item please take a minute to 
read and fill out the forms on the reverse side of this card. 

The  Warranty  Information  Card  helps  us  learn  more  about  you  and  what  you  purchase.  From  this  information  come 
improvements and new products for you, our valued customers. Please return this card within 10 days of purchase. 

The full Warranty Certificate tells you that we stand behind our products and will repair this item as long as you own the 
product, per the terms of the warranty certificate. 
The Service or repair card is your way of communicating with our Customer Service Department should a problem occur. It 

helps us to quickly service your product and return it as soon as possible. Please complete and include this card whenever 
you return a product again. 
Thank you once again for selecting our product. We hope this will be one of the many ELEKTRAL® products you will own. 

 

Date/Place Purchased   :.................................. 
Invoice Date, No 

:..................................

 

 

Dealer Company’s Title  :.................................. 
Address :.......................................................... 

........................................................................ 
Telephone-Fax 

:................................... 

E-mail 

:................................... 

DEALER COMPANY 

:...................

 

................ 

 

Содержание ThruScan s15-i






























































Отзывы: