72
72
EN
ESIM384 Installation and Configuration Manual v1.1
EKB3/
EKB3W/
EWKB4
Enter parameter 25/21/55, event number, user phone number slot and parameter
status value:
User phone number:
25 03 up 1 #
SMS text message to all users simultaneously:
21 03 1 #
SMS delivery report:
55 03 1 #
Value:
up
- user phone number slot, range - [01... 10].
Example:
2503101#
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
By, default the system will not ring the listed phone number via PStN in case of alarm. to manage this feature, please refer to
30.2.3.
PStn)
For more details on how
Send SMS text message to all users simultaneously
and
SMS Cascade
parameters affect the SMS text message
transmission, please refer to
27. SYStEM notIfICatIonS.
By default, tamper alarm notification by SMS text message is enabled. For more details on how to disable/enable tamper alarm notification,
please refer to
16. taMPErS
.
attEntIon:
Regardless of the Call in Case of Alarm parameter status, the system will NOt ring the listed user phone number via GSM net-
work if the system is connected to the monitoring station (see
30. MonItorInG StatIon
).
17.2. audio files and Introduction audio
the system comes equipped with a feature, allowing to record up to 16 audio files of up to 6 seconds length, and another feature, which
allows to record 1 introduction audio file of up to 20 seconds length,using the microphone of the PC. Recorded files can be assigned to any
system zone and be played when the alarm is caused by zone with an audio file assigned, these features will be available only if the system
is able to dial user phone number in the event of an alarm and the user answers the call. When the call is answered, the primarily recorded
introduction audio file (if assigned), containing essential information (location/ full address or/and user full name) is being played, while
the audio file (up to 6 sec. long) will come up just after introduction audio has ended. the supported audio file format is as follows:
•
Max. number of audio files: up to 16
•
Max. audio length: up to 6 seconds
•
Max. number of introduction audio files: 1
•
Max. introduction audio length: up to 20 seconds
•
File format: .wav
•
Specifications: 8,000 kHz; 8 Bit; Mono
By default, none of these audio files are pre-recorded or assigned to any particular zone. to record an introduction audio or audio file and/
or assign it to a zone, please refer to the following configuration method.
record and manage
audio files
ElDES
Config-
uration
soft-
ware
this operation may be carried out from the PC using the
ELDES Configuration
software.
assign audio file to
individual zone
ElDES
Config-
uration
soft-
ware
this operation may be carried out from the PC using the
ELDES Configuration
software.
notE:
Single audio file can be assigned to multiple zones.
