158
158 EN
ESIM384 Installation and Configuration Manual v1.1
32. WIrED DEVICES
32.1. rS485 Interface
the system comes equipped with RS485 interface used for the communication with the following devices:
•
eKB2 - LCD keypad. Up to 4 units supported.
•
eKB3 - LeD keypad. Up to 4 units supported.
•
ePGM1 - hardwired zone and PGM output expansion module. Up to 2 units.
•
eLAN3-ALARM - ethernet communicator. 1 unit supported.
the terminals of RS485 interface are Y (yellow wire) and G (green wire) terminals, which are data bus. the devices, connected to RS485
interface, must be powered from the AUX+ and AUX- terminals or by an external power supply.
For more details on RS485 device wiring, please refer to
3.2.7. rS485
.
For more details on technical specifications and installation, please refer to the latest user manual of the device located at
www.eldesalarms.com
32.1.1. EKB2 - lCD Keypad
Main features:
•
Alarm system arming and disarming (see
12.3. EKB2 Keypad and User/Master Code
).
•
Arming and disarming in Stay mode (see
15. StaY MoDE
).
•
System parameter configuration (see
5. ConfIGUratIon MEtHoDS
).
•
PGM output control (see
18.4. turning PGM outputs on and off
).
•
System information display (see
32.1.1.1. Icons and Messages
).
•
Audio indication by built-in buzzer.
•
Wireless device information display (see
19.2. Wireless Device Information and Signal Status Monitoring
).
•
temperature display (see
32.1.1.1. Icons and Messages
).
•
time display (see
32.1.1.1. Icons and Messages
).
For more details on technical specifications and installation, please refer to the latest user manual of the device located at
www.eldesalarms.com
