74
74
EN
ESIM384 Installation and Configuration Manual v1.1
Disable EPGM8 mode
EKB2
Menu path:
OK
→
iiii
→
OK
→
USING ePGM8
→
OK
→
DISABLe
→
OK
Value:
iiii
– 4-digit installer code.
EKB3/
EKB3W/
EWKB4
Enter parameter 33 and parameter status value:
33 0 #
Example:
330#
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
18.3. PGM output names
each PGM output has a name that can be customized by the user. typically, the name specifies a device type connected to a determined
PGM output, for
Example:
Lights. the name can be used instead of PGM output number when controlling the PGM output by SMS text
message. By default, the PGM output names are:
C1 – Controll1, C2 – Controll2, C3 – Controll3, C4 – Controll4 etc.
Set PGM output name
SMS
SMS text message content:
ssss_Coo:out-name
Value:
ssss
– 4-digit SMS password;
oo
– PGM output number, range – [1... 80];
out-name
–
up to 16 characters PGM output name.
Example:
1111_C2:Lights
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
View PGM output
names
SMS
SMS text message content:
ssss_INFO
Value:
ssss
– 4-digit SMS password.
Example:
1111_STATUS
EKB2
Menu path:
OK
→
mmmm
→
OK
→
PGM OUtPUtS
→
OK
→
out-name
Value:
mmmm
– 4-digit master code;
out-name
– up to 16 characters PGM output name.
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
attEntIon:
Space, colon, semi-colon characters, parameter names and/or values, such as PSW, StAtUS, ON, OFF etc. are NOt allowed in
PGM output names.
18.4. Disabling and Enabling PGM outputs
By default, all PGM outputs are enabled. Once a PGM output is disabled, it can be turned ON or OFF thus the change will not be seen neither
on the eKB2 keypad nor via Cloud platform. to disable/enable a certain PGM output, please refer to the following configuration method.
Disable/enable PGM
outputs
ElDES
Config-
uration
softwarel
this operation may be carried out from the PC using the
ELDES Configuration
software.
18.5. turning PGM outputs on and off
By default, all PGM outputs are turned OFF. to instantly turn ON/OFF an individual PGM output and set its state to ON/OFF when the system
starts-up, please refer to the following configuration methods.