Eldes ESIM384, Руководство по установке

Страница: 8 / 198

88 EN ESIM384 Installation and Configuration Manual v1.1
1. GEnEral InforMatIon
1.1. functionality
eSIM384 – micro-controller based alarm system for houses, cottages, country homes, garages and other buildings, also capable of manag-
ing electrical appliances via cellular GSM/GPRS network. It can also be used as Intercom system.
Examples of using the system:
• Property security.
• Alarm switch.
• thermostat, heating and air-conditioner control, temperature
monitoring.
• Lighting, garden watering, water pump and other electrical
equipment control via SMS text messages.
• Remote listening to what is happening in the secured area.
• Mains power status notification by SMS text message.
• two-way intercom device via GSM network.
1.2. Compatible Device overview
Wired Devices
Device Description Max. Connectible Devices
eKB2 LCD keypad 4*
eKB3 LeD keypad 4*
eA1 Audio output module with 3,5mm jack 1**
eA2 Audio amplifier module 1W 8Ω 1**
ePGM1 16 zone and 2 PGM output expansion module 2
eLAN3-ALARM ethernet communicator 1
ePGM8 8 PGM output expansion module 1**
Wireless Devices
Device Description Max. Connectible Devices
eW2 Wireless 2 zone and 2 PGM output expansion module 16*****
eWP2 Wireless motion detector 32***
eWP3 Wireless motion detector 32***
eWD2 Wireless magnetic door contact/shock sensor/flood sensor 32***
eWD3 Wireless magnetic door contact/shock sensor/flood sensor 32***
eWK1**** Wireless keyfob with 4 buttons 5***
eWK2**** Wireless keyfob with 4 buttons 5***
eWS3 Wireless indoor siren 32***
eWK2A**** Wireless keyfob with 1 button 5***
eWS2 Wireless outdoor siren 32***
eKB3W Wireless LeD keypad 4***
eWKB4 Wireless LeD keypad 4***
eWKB5 Wireless touchpad 4***
eWF1 Wireless smoke detector 32***
eWF1CO Wireless smoke and CO detector 32***
eWR2 Wireless signal repeater 4***
eWM1 Wireless power socket 32***
* - A mixed combination of eKB2 and eKB3 keypads is supported. the combination can consist of up to 4 keypads in total.
** - Only 1 of these modules can be connected at a time if the module slots are implemented in eSIM384 unit.
*** - A mixed combination of wireless devices is supported. the combination can consist of up to 32 wireless devices in total.
**** - A mixed combination of eWK1, eWK2 and eWK2A keyfobs is supported. the combination can consist of up to 5 keyfobs in total.
***** - eW2 creates 4 wireless zones, therefore the max. number of connectible eW2 devices is 16 if no keypad zones, no ePGM1 and no
virtual zones exist in the system’s configuration.
1.3. Default Parameters and Ways of Parameter Configuration
Main Settings
Parameter Default Value
Configurable by:
SMS EKB2
EKB3/
EKB3W/
EWKB4
Configuration
Software
User 1... 10 name N/A

User 1... 10 phone number N/A
   
User 1... 10 partition Partition 1
  
User 1...10 - call in case of alarm enabled
  
Allow control from any phone number Disabled
   
SMS password 0000
   
SMS language Depends on the firmware
Partition 1 name PARt1

Partition 2 name PARt2

Partition 3 name PARt3

Partition 4 name PARt4
