45
45
EN
ESIM384 Installation and Configuration Manual v1.1
When the SMS text message for arming is sent to the system’s phone number, the system will proceed as follows:
•
non-partitioned system:
•
If ready (no violated zone/tamper), the system will arm.
•
If unready, the system will not arm and provide a list of violated zones/tampers by SMS text message to user phone
number. In such case the user must restore all violated zones and tampers before arming the system. Alternatively, the
violated zones can be bypassed (see
14.7. Bypassing and activating Zones
), disabled (see
14.9. Disabling and
Enabling Zones
) or a Force attribute enabled (resulting in partial arm; see
14.6. Zone attributes
), while the tampers
can be disabled (see
16. taMPErS
).
•
Partitioned system:
•
If all partitions are disarmed ready (no violated zone/tamper), the system will arm them.
•
If one or more partitions are disarmed unready (violated zone/tamper is present), the system will arm the ready par-
tition (-s) and skip the unready one (-s). the system will then send an SMS text message, containing a list of violated
zones/tampers, to user phone number that the system arming was initiated from.
•
If a combination of armed and disarmed ready partitions is present, the system will arm the disarmed ready partitions
and skip the armed ones.
to disarm the system and turn OFF the alarm by SMS text message, send the following text to the system‘s phone number from any of 10 available
user phone numbers:
Disarm the system and
turn off the alarm
SMS text message content:
ssss_DISARMp
or
ssss_DISARMp,p,p,p
Value:
ssss
– 4-digit SMS password;
p
– partition number, range – [1... 4].
Example:
1111_DISARM1,2,4
SMS
User
eSIM384
34
When a user phone number is assigned to multiple partitions, the user will be able arm/disarm the corresponding system partitions by
sending the SMS text message to the system’s phone number. For example, if User 3 is assigned to Partition 2 and 3, the user will be able
to arm/disarm Partition 2 and/or 3 by sending an SMS text message from User 3 phone number. For more details on how to set user phone
number partition, please refer to
23.2. User Phone number Partition
.
By default, all listed user phone numbers are granted with permission to arm and disarm the system by free of charge phone call and SMS
text message. to disable/enable arming or disarming for certain listed user phone numbers, please refer to the following configuration
method.
Manage arming and
disarming for listed
user phone numbers
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
12.3. EKB2 Keypad and User/Master Code
icon displayed next to the partition name in the home screen view of eKB2 keypad indicates that no violated zones and/or tampers
are present, therefore the partition is ready for arming. If icon is displayed instead, the partition is unready for arming, therefore the
user must restore all violated zones and/or tampers before arming the partition. Alternatively, the violated zones can be bypassed (see
14.7. Bypassing and activating Zones
), disabled (see
14.9. Disabling and Enabling Zones
) or a Force attribute enabled (resulting
in partial arm; see
14.6. Zone attributes
), while the tampers can be disabled (see
16. taMPErS
).
icon appears in the home screen
view if system fault (-s) exist (see
29. InDICatIon of SYStEM faUltS
).
When a user/master code is assigned to multiple partitions, the user will be able arm/disarm the corresponding system partitions by eKB2
keypad using partition selection menu. However, if a user/master code is assigned to Partition 1, 2 and 4, while eKB2 keypad is assigned
to Partition 2, the user will be able to arm/disarm Partition 1, 2 and 4, but the keypad will only display Partition 2 name and the related
information in home screen view. For more details on how to set keypad partition and user/master code partition, please refer to
23.3.
Keypad Partition and Keypad Partition Switch
and
23.4. User/ Master Code Partition
respectively.
12.3.1. arming the System
to arm the system by eKB2 keypad, enter any out of 29 available 4-digit user codes or master code using the number keys on the keypad
(see
10. MaStEr anD USEr CoDES
for user/master code management). By default, the arming process is as follows:
•
non-partitioned system
- When a valid user code is entered, the system will initiate exit delay, the keypad’s buzzer will emit short
beeps, the keypad will switch to home screen view and display the countdown timer.
