153
153
EN
ESIM384 Installation and Configuration Manual v1.1
Enable parallel data
transmission
EKB2
Menu path:
OK
→
iiii
→
OK
→
MS SettINGS
→
OK
→
IP SettINGS
→
OK
→
PARAL.DS.MODe
→
OK
→
eNABLe
→
OK
Value:
iiii
– 4-digit installer code.
EKB3/
EKB3W/
EWKB4
Enter command 96, parameter number and parameter status value:
96 01 1 #
Example:
96011#
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
Disable parallel data
transmission
EKB2
Menu path:
OK
→
iiii
→
OK
→
MS SettINGS
→
OK
→
IP SettINGS
→
OK
→
PARAL.DS.MODe
→
OK
→
DISABLe
→
OK
Value:
iiii
– 4-digit installer code.
EKB3/
EKB3W/
EWKB4
Enter command 96, parameter number and parameter status value:
96 01 0 #
Example:
96010#
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
30.2.2. Voice Calls and SMS
the system supports up to 3 monitoring station phone numbers for communication with the alarm system by Voice Calls or SMS communi-
cation method using Ademco Contact ID or Cortex SMS data format respectively. tel. Number 1 is mandatory, the other two can be used as
backup phone numbers and are not necessary. the supported phone number formats are the following:
•
International (with plus)
– the phone numbers must be entered starting with plus and an international country code in the fol-
lowing format: +[international code][area code][local number], example for UK:
+44170911XXXX1
. this format can be used when
setting up the phone number by
ELDES Configuration
software.
•
International (with 00)
– the phone numbers must be entered starting with 00 and an international country code in the following
format: 00[international code][area code][local number], example for UK:
0044170911XXXX1
. this format can be used when setting
up the phone number by eKB2/eKB3/eKB3W/eWKB4 keypad.
•
local
– the phone numbers must be entered starting with an area code in the following format: [area code][local number], example
for UK:
0170911XXXX1
. this format can be used when setting up the phone number by eKB2/eKB3/eKB3W/eWKB4 keypad and
EL-
DES Configuration
software.
to set up the system for data transmission via Voice Calls or SMS, please follow the basic configuration steps:
1. enable MS Mode parameter (see
30. MonItorInG StatIon
).
2. Set 4-digit Main Account number (see
30. MonItorInG StatIon
).
3. Set tel. Number 1... 3.
Set monitoring station
phone number
EKB2
Menu path:
OK
→
iiii
→
OK
→
MS SettINGS
→
OK
→
VOICe CALLS/SMS St
→
OK
→
teL. NUMBeR 1... 3
→
OK
→
ttteeellnnuumm
→
OK
Value:
iiii
– 4-digit installer code;
ttteeellnnuumm
– up to 15 digits monitoring station phone
number.
EKB3/
EKB3W/
EWKB4
Enter parameter 26, phone number slot and phone number
:
26 ps ttteeellnnuumm #
Value:
ps
– phone number slot, range – [01... 03];
ttteeellnnuumm
– up to 15 digits monitor-
ing station phone number.
Example:
26010044170911XXXX1#
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.