31
31
EN
ESIM384 Installation and Configuration Manual v1.1
•
Running tCP/IP server on
ELDES Configuration software
(advanced). the connection can be established on the system via GPRS
network or ethernet using eLAN3-ALARM communicator.
•
Direct connection via ethernet using eLAN3-ALARM communicator.
In order to start using the remote configuration feature, please run the step-by-step wizard and follow the steps provided in the start page
of
ELDES Configuration
software. Please, note that based on the selected method, it might be necessary to send an SMS text message to
the system’s phone number in order to initiate the remote connection. By following the steps you will be instructed on what text must be
sent to the system’s phone number in such case.
5.4.2. Ending the remote Connection Session
After the remote system configuration is complete, use one of the following methods to end the configuration process:
•
Click
Disconnect
or
Stop
button and close
ELDES Configuration
software.
•
the session will automatically expire in 20 minutes. Before the last 5 minutes, the software will offer the user to extend the session for
another 20 minutes.
•
Alternatively, the connection with the server can be terminated at any time by sending an SMS text message.
terminate the
connection with server
SMS
SMS text message content:
ssss_eNDCONFIG
Value:
ssss
– 4-digit SMS password.
Example:
1111_ENDCONFIG
Once the session is expired or terminated, the system will reply with an SMS text message confirming the end of the session.
5.5. System configuration by USB cable
In order to configure the system by USB cable, the user must plug the specified cable into personal computer’s USB port and launch the
pre-installed eLDeS Configuration software. Configuration by USB cable and eLDeS Configuration software does not require the external
power supply to be connected to the device. However, the device will NOt fully function when USB-powered .the user will be able to carry
out some major part of system’s configuration, with the exception of those functions, which are strictly related to GSM modem (disabled
during the selected configuration period) or associated with the Wireless connectivity (also disabled).