68
68
EN
ESIM384 Installation and Configuration Manual v1.1
EKB3/
EKB3W/
EWKB4
Enter parameter 25/21/55, event number, user phone number slot and parameter
status value:
User phone number:
25 13 up 1 #
SMS text message to all users simultaneously:
21 13 1 #
SMS delivery report:
55 13 1 #
Value:
up
- user phone number slot, range - [01... 10].
Example:
2513041#
ElDES
Config-
uration
soft-
ware
this operation may be carried out from the PC using the
ELDES Configuration
software.
For more details on how to view violated tamper, please refer to 1
7. alarM InDICatIonS anD notIfICatIonS for USEr
.
attEntIon:
Once a certain tamper is disabled, the system will NOt deliver any text message regarding the physical tamper violation nor
wireless signal loss or restore.
attEntIon:
the system will NOt deliver any text message regarding wireless signal loss or restore while the physical tamper violation is
in progress.
attEntIon:
the system will NOt cause any tamper alarm regarding the physical tamper violation nor wireless signal loss if the associated
zone is disabled (excepting eWKB 4 on board zone).
16.1. tamper names
each tamper has a name that can be customized by the user. the tamper names are used in SMS text messages that are sent to the user
during the tamper alarm. By default, the tamper names are:
Tamper 1, Tamper 2, Tamper 3, Tamper 4 etc
. to set a different tamper name,
please refer to the following configuration methods.
Manage tamper name
ElDES
Config-
uration
soft-
ware
this operation may be carried out from the PC using the
ELDES Configuration
software.