8-71
2.
This file points the software to the correct configuration file based on the hardware's frequency
set in use. Locate the [Main] section and take note of the .ini file being called out. As an example:
the below file specifies the system is a 520kHz / 1600kHz Side Scan with 520kHz Bathymetry and,
as such, utilizes the sonar_520B_1610.ini.
Figure 8-26: SonarConfig.ini Example
3.
Close the SonarConfig.ini without making any changes to the text.
4.
Open the file name specified in the SonarConfig.ini. It is found in the same directory.
5.
Make sure the TimeSyncSource=POSMV_BINARY or it includes it in a list. Ensure there is no
semicolon in front of this iteration of the keyword.
Figure 8-27: TimeSyncSource POSMV_BINARY Keyword
6.
In the [DSP0] section of this file, ensure the OnePPSInputLine keyword is set to the following:
OnePPSInputLine=2. Ensure there is no semicolon in front of the keyword.
7.
Select File > Save and close the text document.
CAUTION!
Do not alter the file other than what has been specified.
This configuration sets the software to utilize the time and date reference received from the POS-MV data
string. It also activates the 1PPS port on the topside module. Due to the inherent added latency, a 1PPS
sync must be utilized when data is received via UDP.
Содержание 6205S2
