8-55
2.
Specify what serial port to use for each particular input message. For example, in
COM1 is used to feed GGA, VTG, and GGK, as shown in
, red box, to the 6205s2 Sonar
Head, while COM 2 feeds in HDT, as shown in
, green box.
3.
When satisfied with the serial port setup, click on the
X
at the top right of the dialog box.
4.
Monitor Discover’s Lower Control Panel Main Status Line Display and Radio Indicator Tabs to
ensure all supporting data is present.
Figure 8-9: Sonar Control Tab
NOTE:
Refer to the
for more information
.
8.2.2
Two Sensors Output Same Information with Different Messages
Some motion sensors cannot turn off specific fields within their output strings. For example, a sensor that
outputs an OCTANS message delivers roll, pitch, heading, and heave to the 6205s2 Sonar Head with no
way for the particular sensor to turn off any of these specific fields. If a sensor like this is paired with
another sensor that outputs the same information but in a different message format (i.e., NMEA HDT),
redundant information is supplied to the system. This poses a problem and can lead to a significant
alignment error in the 6205s2 data.
To correct this, the 6205s2 can be programmed to ignore specific fields within one particular message.
Use the example above and state the second heading sensor is preferred. Proceed to the following steps:
1.
Log in to Remote Desktop as outlined in sub-section
2.
Double click on the folder labeled “Shortcut to EdgeTech Folder.”
3.
Navigate to the
D:/EdgeTech/SSSSonarBathy/Sonar
directory and open the
SonarSerial.ini
file.
WARNING!
Be careful in manipulating this file and only change what is
stated in these directions. Changing any other field may cause sonar
malfunction.
Содержание 6205S2
