8-69
CAUTION!
EdgeTech recommended performing the process described in
the section below through Discover, but the process below provides an
alternative. Please refer to the
information on how to complete this process in Discover.
8.3.5
Applanix POS-MV Configuration
Figure 8-24: Example Applanix POS-MV GNSS/INS Unit
The 6205s2 is compatible with the POS-MV system from Applanix. Follow the below steps to configure
the 6205s2 and the POS-MV for communication over the Ethernet interface via UDP.
Utilizing the Applanix POSVIEW software:
1.
Set the ethernet real-time output data to groups 3,7,10, and 102. The output rate of the POSMV
data should be set to 50Hz.
2.
The POS-MV must also be set to Falling (Negative) Edge or
Active Low
for the 1PPS as the 6205s2
defaults to sync on the falling edge.
3.
Set the POS-MV Time Tag 1 to UTC.
To configure the 6205s2 COM ports for the UDP messages from the POS-MV:
1.
2.
Under [Serial1], [Serial2], and [Serial3] set Create = 0.
Содержание 6205S2
