![background image](http://html1.mh-extra.com/html/eaton/easy800/easy800_manual_3950236095.webp)
3 Commissioning
3.10 Commissioning an Net network
Control Relay easy800
11/11 MN04902001Z-EN
www.eaton.com
91
3.10.1 Parameterizing NET stations
Requirement: The easy800 device must be in STOP operating mode.
Figure 80:
The Status display is active and you move as follows to the NET Parameters
menu:
▶
Simultaneously press the DEL and ALT buttons.
▶
Select the CONFIGURATOR menu option and press the OK pushbutton.
▶
Select the NET menu option and press the OK pushbutton.
▶
Select the NET PARAMETERS menu option and press the OK button.
▶
Use the
Í
and
Ú
buttons to assign the NET ID (in this case: NET ID 01) in
the NET PARAMETERS menu and confirm the setting with OK.
▶
Switch to Baud rate and set here the highest possible value that your
NET allows (
The remaining parameters are not described further here. They are described
in detail (
section “Description of the NET-PARAMETERS”, page 277).
▶
If all settings are ok, press ESC to exit the menu.
You have parameterized the station with NET-ID 1.
If you have chosen a loop-through cable routing, you can now create the NET
station list in the STATIONS menu, and then assign the NET-IDs via the
CONFIGURE menu item, and set a standard baud rate and bus delay time.
If you have chosen spur line cable routing, repeat the steps of this chapter
for each further station of the NET.
I..............
I
P-
MO 02:00
Q
SECURITY...
SYSTEM...
MENU LANGUAGE
CONFIGURATOR...
NET..
LINK...
ETHERNET_GW...
NET
PARAMETERS...
STATIONS...
CONFIGURE...
NET
ID : 01
Æ
BAUD RATE:125KB
BUS DELAY: 00
SEND IO
å
æ
REMOTE RUN
å
→
The functions REMOTE RUN and REMOTE IO are not required
for the station with NET ID 1 and are therefore not available
here.
Содержание easy800
