5 Function blocks
5.16 HW, weekly timer
Control Relay easy800
11/11 MN04902001Z-EN
www.eaton.com
199
Contacts and Coils
The contact of the function block is evaluated in the circuit diagram. It closes
for the on time and opens for the off time on the defined days.
Example for a weekly timer:
Figure 136:Wiring of the function block contact
The weekly timer controls a device output directly.
Parametric programming of the function block inputs/outputs
When using the function block in the circuit diagram for the first time, use
OK to automatically enter the general display of function block parameters,
as shown in the figure on the left. The function block settings are carried out
here. The display contains the following elements:
Channel
For each weekly timer channels A, B, C and D are available. These channels
all act jointly on the contact Q1 of the 7-day time switch.
Day 1 and day 2
These parameters DY1/DY2 are used to limit the period in which the output
HW..Q1 is switched.
Enter either a period of several days or only of one day:
Contacts
Meaning
HW..Q1
Switching contact; closes in the defined period
HW14Q1---------------------------
Ä
Q 01
HW14 A +
>DY1
>DY2
>ON
>OFF
HW14
Function block: Weekly timer, number 14
A
Time switch channel: A
+
Parameter set can be called via the PARAMETERS menu
>DY1
Day 1: Day on which the switch-on is to occur for the first time (start of time period).
>DY2
Day 2: Day on which the switch-off is to occur for the last time (end of time period).
>ON
Closing delay: 00:00 - 23:59, No on switching: --:--
>OFF
Break time: 00:00-23:59,
No off switching: --:--
Parameters
Function
A
Display of the parameters: Channel A
B
Display of the parameters: Channel B
C
Display of the parameters: Channel C
D
Display of the parameters: Channel D
Содержание easy800
