![background image](http://html1.mh-extra.com/html/berker/2912/2912_quick-start-manual_2737450001.webp)
BLC relay insert HVAC
Order-No. : 2912
Operation- and
Assembly Instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock on the SELV/PELV installation. Not suitable for switching SELV/
PELV voltages.
Danger of electric shock. Do not operate the insert without a cover.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
picture 1
(1) Flush-mounted insert
(2) Frame
(3) Pushbutton cover
(4) Adjuster for run-on time of output
HLK
(5) Connection terminals for mains voltage and output
Kanal 1
(6) Connection terminals for output
HLK
for HVAC
Seite 1/6
BLC relay insert HVAC
82541321
97-09545-000
30.07.2010
BLC