Maintenance operations
Caution
During the next operation, the fluid level must remain topped up at all times. The end of the transparent plastic
tubing must remain immersed in the discharged brake fluid at all times.
Operate the clutch lever several times to let the fluid reach all points of the circuit and expel any air.
Connect the bleeder to the bleed valve (3).
Note
If you are using a commercial bleeder, follow the manufacturer's instructions.
Pump with the bleeder and slacken the bleed valve (3). Ensure the fluid level never drops below the
MIN
level.
Repeat the bleeding operation until air bubbles no longer come out of the plastic tube connected to the bleed valve
(3).
If you do not have a bleeder available, connect a length of transparent plastic tubing to the bleed valve (3) as outlined
in the draining procedure.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_D_4_5_00.18.1.html (18 of 29) [10/7/2008 8:42:49 PM]