Maintenance operations
Fine adjustment can be made by turning the adjuster (1) on the twistgrip.
For larger adjustments of the throttle cable, use the adjuster (2) located on the RH side of the throttle body.
Remove the cap, loosen the lock nut (3) and turn the adjuster (2) to obtain the required play.
Tighten the lock nut and refit the cap.
To adjust the choke control cable, turn the control level on the handlebar until fully open and check that the plate (6)
is touching the end stop.
In this condition, ensure that engine is at
2000 rpm.
Turn screw (7) to adjust the rpm.
Likewise, loosen the lock nut (5) and work the adjuster (4) to adjust the throttle control cable.
Check for proper conditions of the outer sheaths of the throttle and choke cables at regular intervals. The outer plastic
sheath should not be damaged or cracked.
To ensure smooth operation of these cables, grease the cable ends with the recommended grease at regular intervals.
Work the throttle or operate the choke lever to make sure core cable is sliding smoothly. If not so, change the cable.
To lubricate the throttle control, unscrew the two screws (9) and remove cover (8).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_D_4_5_00.18.1.html (26 of 29) [10/7/2008 8:42:49 PM]