Stands
Checking protection and safety devices components
Reassembling the side stand
Grease the stand (1) and fit it to the plate (3). Secure it with pivot (8) and nut (9). Tighten the pivot (8) to the
specified torque (Sect. C 3,
).
Position the stand return springs (6), fix them to the pivot of plate (10) and to the stand (1) and tighten.
Position the switch (5) to pivot (8) on the plate.
Fit the retaining screw (4) and tighten to the specified torque (Sect. C 3,
).
Refitting the side stand
Position the side stand plate (3) to the frame. Apply the specified threadlocker to the threads of the two screws (2)
and start the screws in their holes.
Tighten the screws (2) to the specified torque (Sect. C 3,
Connect the connector (A) of the side stand switch to the main wiring harness.
Arrangement of wiring on frame
, for side stand switch cable routing.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_H_5_7_00.44.1.html (3 of 3) [10/7/2008 8:44:21 PM]