Testers
Insert fitting (9) in the hose (12) fitting, and place two copper washers (20) in-between. Screw the connector (9) of
the hose (12) into the threaded hole (M10x1mm) in the RH cover. Screw the connector all the way in. Refit the
pressure switch (21) complete with seal to the connector (9) and reconnect it to the electric system connector (A).
Connect the pressure sensor (5), to the hose (12), in order to convert the pressure reading into an electric signal.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_D_5_5_00.19.1.html (19 of 41) [10/7/2008 8:43:05 PM]