Cylinder / piston assy
Lubricate cylinder inner bore with engine oil. Use an all-purpose tool to slide piston gently into cylinder with the
smaller valve pocket placed at exhaust end.
Clean off any carbon deposits and degrease the mating surfaces of engine casings and cylinders.
Ensure that the engine block includes the cylinder centring pins (
11
).
Apply liquid gasket to the gasket (6) as shown in the figure.
Position the gasket (6) on the cylinder (8). Be sure to match the holes.
Use tool part no.
88700.5644
to bring connecting rod small end to TDC. Slide the cylinder-piston assembly onto the
casing stud bolts.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_5_9_00.66.1.html (11 of 13) [10/7/2008 8:45:50 PM]