Final drive
Insert the retaining plate (11) on the gearbox secondary shaft (B) and rotate it inside the recess (A) so that the plate
holes (11) match the threaded holes in the sprocket (12); position the retaining plate with the rounded corner facing
the sprocket.
Apply threadlocker to the thread of the screws (10).
Engage first gear.
Tighten the screws (10) to the specified torque (Sect. C 3,
).
Adjust chain tension (Sect. D 4,
Removing the rear sprocket
Operations
Reference See Section
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_G_8_8_00.39.1.html (4 of 6) [10/7/2008 8:44:07 PM]