Throttle body for plastic tank
Unscrew the two screws (12) to release the throttle position sensor (2) from the throttle body.
Removing the injectors
Loosen the clips (7) that hold delivery hose (9), return hose (
13
) and injector connection hose (6) to the injectors.
Unscrew the screws (14) to release the injectors from the throttle body. Collect the washers (
15
).
Refitting the injectors
Grease the O-rings of the injectors.
Position the washers (
15
) and tighten the screws (14) to the specified torque (Sect. C 3,
).
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_L6_10_00.50.1.html (3 of 6) [10/7/2008 8:44:47 PM]