Casing unit: crankcases
Tighten all screws to the specified torque. Begin with the larger diameter screws.
Check that crankshaft rotates with a certain amount of interference in the main bearings. Crankshaft must have a pre-
load of
0.15 - 0.20
mm. Check also that all assembled parts can rotate or move correctly.
Fit oil seal (
11
) and spacer with O-ring on gearbox secondary shaft as described under Sect. G 8,
Operations
Reference See Section
Refit mesh filter
Refit the complete clutch unit
N 6.1,
Refit the clutch-side cover
N 6.2,
Refit engine ignition assembly
P 3,
Refit the generator-side cover and
the complete generator
Refit the complete cylinder / piston
assembly
Refitting cylinder / piston assy
Refit complete head assembly and
timing system parts
N 4.2,
Refit the lubrication system
N 2.1,
Refit engine to frame
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_9B9_00.74.1.html (25 of 25) [10/7/2008 8:46:35 PM]