Casing unit: crankcases
Remove selector drum, forks and pins.
Fit the casing and secure it with a few screws (V) near the gearbox shafts.
Measure end float of secondary and primary shafts with the dial gauge.
Final play must be between
0.05
and
0.20
mm for both shafts.
Note
Play should be closer to
0.05
rather than
0.20
mm.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_9B9_00.74.1.html (17 of 25) [10/7/2008 8:46:35 PM]