Protection and safety devices
Note
The same test may be done using the
“
DDS
”
).
Checking the side stand switch
Remove switch from side stand (Sect. H 5,
) and disconnect it from the main
wiring harness (refer to
Arrangement of wiring on frame
under Sect. P 1).
Use an analog or digital multimeter (Sect. P 9,
How to use the multimeter to check electric systems
) to
check switch correct operation (see table).
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_P_6_9_00.83.1.html (2 of 4) [10/7/2008 8:47:12 PM]