Cylinder heads: side covers / timing system
Warning
Every time a timing part is replaced, it is good practice to check the timing (Sect. N 4.1,
).
Remove the two locking tools (
88713.2009
) from belt roller flange.
Remove the tool part no.
88713.2011
you used to lock the crankshaft. Unscrew the tool bolt (E).
Refit the small cover (C) to the generator cover and start the two screws (D) in their holes.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4B9_00.63.1.html (15 of 17) [10/7/2008 8:45:27 PM]