Cylinder heads: side covers / timing system
Fit the locking tool part no.
88713.2011
to the crankshaft and tighten by hand pin (E) fully home.
Tighten the two tools part no.
88713.2009
as shown in the figure to lock the flanges (17) of the horizontal and
vertical belt rollers (16). Tool ends must locate into the flange slots.
Install the horizontal (
9
) and vertical (28) timing belts manually. Do not use any tools and do not disturb belt rollers
alignment.
Align the two timing marks (F) on belt rollers (16) with the tool ends
88713.2009
.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4B9_00.63.1.html (13 of 17) [10/7/2008 8:45:27 PM]