Preliminary checks
1 - Preliminary checks
Running-in precautions
Max. rotation speed
Rpm limits to be observed during the running-in period and in normal operation:
1 Up to
1000
km;
2 From
1000
to
2500
km;
Max. rotation speed up to 1000 km
During the first
1000
km, keep an eye on the revolution meter. The indicator must not exceed
5500
-
6000
rpm. During the first hours of riding, it is advisable to run the engine at varying load and rpm,
though still within the recommended limit.
Twisty roads and gradients are ideal to break in engine, suspensions and brakes effectively. Apply the
brakes gently and avoid hard, prolonged braking until covering the first 100 km.This will allow the
brake pad lining to wear in properly rubbing on the brake discs. For all mechanical moving parts of the
motorcycle to adapt to one another and above all not to adversely affect the life of basic engine parts,
it is advisable to avoid harsh accelerations and not to run the engine at high rpm for too long,
especially uphill. Furthermore, the drive chain should be inspected frequently. Lubricate as required.
Max. rotation speed from 1000 to 2500 km
At this point, you can squeeze some more power out of your engine, being careful, however, to never
exceed
7000
rpm. Follow-ing these recommendations strictly will extend the life of your engine and
reduce the likelihood of overhauls or tune-ups.
Caution
During the whole running-in period, the maintenance and service rules recommended in the warranty
card should be observed carefully. Failure to comply with these rules will release Ducati Motor Holding
S.p.A. from any liability whatsoever for resulting engine damage or shorter engine life.
Pre-ride checks
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_D_1_5_00.15.1.html (1 of 2) [10/7/2008 8:42:26 PM]