Gearbox assembly: gear selector levers
Undo clutch-side casing screw (3) and remove ratchet (4), washer (
2
) and spring (
1
).
Reassembling gear stopper and ratchet
Slide ratchet (4), washer (2) and spring (1) on the gear stopper bolt (3).
Position gear stopper to clutch-side casing. The end of the spring (1) must locate behind the casing rib.
Tighten the bolt (3) to the specified torque (Sect. C 3,
Thoroughly grease and then fit ball (
8
), spring (7) and seal (6) into gear stopper (5).
Tighten gear stopper to the specified torque (Sect. C 3,
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_N_7A9_00.70.1.html (4 of 8) [10/7/2008 8:46:06 PM]