Front brake control
diagram.
Line up the clamp / master cylinder body (1) split line (A) with the dot (B) on the handlebar.
Fit the two screws of the clamp (10) securing front brake master cylinder to the handlebar. Tighten U-bolt (10)
screws to the specified torque (Sect. C 3,
) starting from the top one, indicated with an arrow,
and then proceeding in a 1-2-1 sequence. If hose (C) has been disturbed, follow indications as specified under Sect. G
Refitting the front brake system
Operations
Reference See Section
Connect the brake line to master
cylinder
Refitting the front brake system
Fill the braking system
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_F_3_6_00.27.1.html (3 of 3) [10/7/2008 8:43:25 PM]