Plastic fuel tank
The filler plug is fitted with a breather cap (E).
When fitting a new breather cap, apply an even film of speed bonder all round the cap (E) groove.
Install the cap. Make sure it becomes properly seated in the seat in the recess.
Refitting the filler plug unit - plastic tank
Refit the complete plug (14) in the tank housing and tighten the screws (13) and (12) to the specified torque (Sect. C
Replacing fuel tank flange
Release the six retaining screws (27) of the fuel tank flange (26). Remove one every two screws. The three screws
left in place will help lift off the flange (26).
Remove the complete flange (26) from the reservoir.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_L2_10_00.49.1.html (4 of 10) [10/7/2008 8:44:44 PM]