Gearbox assembly: gearbox shafts
Fit another safety washer (6) and another circlip (7) into the shaft. Seat it using the drift.
Reassembling the gearbox
Follow the procedure described under Section N 9.2 "
" to fit parts of the gearbox assembly.
When finished, run a practical test. Place gear in neutral and check that the front coupling dogs (A) of the sliding
gears (B) are centred to the matching dogs of the fixed gears (C), i.e. that the distance is the same at both ends.
Engage the gears and make sure there is always a small clearance between fork (D) and matching groove (E) in the
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_7B9_00.71.1.html (16 of 17) [10/7/2008 8:46:12 PM]