Chapter 4 Gateway Configuration
65
On the “Pickup After Rings” column, input the number of the ring count. If you
set the ring count as “2”, the system will pickup the incoming call after 2 rings.
Flash Timing
Under the application of Centrex, you can set the Flash Timing on the IP
phones through the system. The Flash function was set on the MENU button of
the IP phones. After you complete the Flash Timing setting, you can start to use
some of the Centrex functions. Please make sure the IP phone’s Flash Timing
must be within system’s Flash Timing.
Apply Settings
After finalizing the settings in this port, if you want them to be identical as this
one, you may apply the settings to other CO Line ports present in the system,
saving you the hassles of configuring each port individually.
1. Click on “Apply Setting to” and a new window will appear displaying the
parameters you have entered.
2. Apply or change the settings, as you desire.
3. Enter in the field “Apply to Port” the first and the last CO Line port you
would like to be identical to the present settings. If the range selected
includes this port, the new settings, if any, will also be applied to this one.
Configuring SLT Ports
1. Go to Main Menu>Gateway Configuration>Analog Gateways.
2. Select a gateway from the list then click the Port Setting button.
3. Select a SLT port and click the Port Parameters button.
