Chapter 2 Installing InterPBX Communication System
25
On the “Add Analog Gateway” page, enter the name and the MAC address of
your gateway, and the range of CO Line/SLT ports.
The port number range starts from 1. For example, the CO Line port range of a
24-port VG5000 with FXO interface is from 1 to 24.
For more setting information, please refer to Chapter 4 Gateway Configuration.
14. External Paging Setup
If you connect a paging amplifier to the “PAGING” port on VG5000, select the
“External Paging Enabled” option to enable this function and assign a specific
paging code at “Paging Code” box. For example, if you assign “111” as the
paging code of your VG5000, please dial “111” to broadcast.
15. Music On Hold (MOH) Setup
If the VG5000 Voice Gateway connects to the external music source to play the
Music On Hold, please go to Main Menu>System Configuration>General
Parameters and then enable the “Music On Hold” function. For more details
about MOH, please refer to Chapter 3 System Configuration/System
Parameters/Music On Hold.
Connecting VG5000 via Telnet
Besides connecting VG5000 via the web browser, you can also connect VG5000
via Telnet.
1. Prepare a computer with Telnet program and be sure it is on the same
subnet as of VG5000. Change the computer’s IP settings if necessary. The
suggested web browser is Internet Explorer version 5.0 or later. The default
values of VG5000 are as follows:
Default IP Address: 192.168.1.201
Default Gateway: 192.168.1.254
Default Subnet Mask: 255.255.0.0
2. Open the Telnet program and connect to the IP address of VG5000, or enter
C:\Telnet 192.168.1.201 under DOS. “192.168.1.201” is the default IP
address of VG5000.
3. Enter the default password “1234” to login VG5000.
4. After you have logged into the VG5000 successfully, a window will be
shown as below. Please follow the instruction to edit the IP address,
