204
Appendix F DTMF Programming
Appendix F: DTMF Programming
There is an alternative way of programming VMS Server. Through a touch-tone
telephone, you can edit system parameters or record greeting from anywhere.
Entering the DTMF Programming Mode
1. Call from a telephone to one of the CO lines connected to Blaze or Voice Gateway.
(e.g. Tel. 5551234)
2. Press the key predefined for entering the DTMF Programming Mode (e.g. # button).
The key should be defined on the AA menu. Please refer to Chapter 7 Voice Mail
Configuration for more details.
3. You will be prompted to enter the password for system-wide settings (the default
System Password is “1234”) or to record greeting (the Greeting Recording Password
is “5678”).
4. If you have entered the correct password, you will be prompted to enter the 3-digit
function code. Please enter the 3-digit function code.
5. You will be prompted the current setting of the function you wish to edit. Please
press 1 to edit, press 2 to save or press 3 to replay. Refer to the DTMF and Action
Code Table and follow the prompt to edit settings.
NOTE
: Please note that if you entered the Greeting Recording Password, you are only
allowed to input function code “330” to record AA menu greetings. The AA menu ID is
3-digit (000-299).
DTMF and Action Code Table:
Signal Code
GUI
display
DTMF 1
01
1
DTMF 2
02
2
DTMF 3
03
3
DTMF 4
04
4
DTMF 5
05
5
DTMF 6
06
6
DTMF 7
07
7
DTMF 8
08
8
DTMF 9
09
9
DTMF *
10
*
DTMF 0
11
0
