32
Chapter 2 Installing InterPBX Communication System
middle
button to enter the setup menu. Press the
downward button
next to the middle button to move to the next setting item or the
upward
button next to the middle button to move to the previous setting item. Use the
keypad to input digits.
Plug in the power cord of the IP phone and please DO NOT connect the IP
phone to LAN.
After the system check, press and hold the middle
button for 3
seconds to enter the setup menu.
You will see “EXT NUMBER” shown on the LCD screen. Press the
button to start editing and use the keypad to input the extension number
assigned to the IP phone. Press the
button again to save.
Press the downward
button and the LCD screen will display “IP
ADDRESS.” Press the
button to start editing and use the keypad to
input the IP address assigned to the IP phone. Press the
button to
save.
Follow the above procedures to assign the “GATEWAY IP” and “SUBNET
MASK” to the IP phone
Keep pressing the downward
button until the LCD displays “PBX
SERVER IP.” Press the
button to start editing and use the keypad to
input the IP address of your Blaze/Savanna Server. Press the
button
to save.
Keep pressing the downward
button until the LCD displays “EXIT
SETUP”. Press the
button to exit.
