Dräger Medical Oxylog 1000, Техническая документация инструкция

Страница: 43 / 104

5503.400
F
o
r internal use only
. Copyright reserved
.
V
e
rs
io
n
2
.0_
R
e
le
a
s
ed
_Pr
in
ted
on
_15
.03
.0
6_K
55
034
00
V01
.fm
39
Oxylog 1000 Maintenance Procedures
If the measured pressure is not 1.5 bar, adjust the pressure regulator as
follows:
• Release the adjusting ring of the pressure reducer by pulling the ring out.
• Turn the adjusting ring clockwise to increase the downstream pressure of
the pressure regulator, or counter-clockwise to reduce the pressure.
• After setting the correct downstream pressure, press the adjusting ring of
the pressure regulator down to prevent the downstream pressure being
unintentionally altered.
• Set the main switch of the Oxylog 1000 to „O“.
• Detach the hose from the pressure gauge and re-connect it to the con-
nection socket of the main switch.
• Check that there is no leakage in the hose system of the Oxylog 1000.
• Install the drawer unit in the reverse sequence into the housing of the
Oxylog 1000.