manualshive.com logo in svg

Ditch Witch JT5, Руководство оператора

Поделиться
Скачать
Ditch Witch JT5 Скачать руководство пользователя страница 4

JT5 Operator’s Manual

Overview - 3

Intended Use

CMW

®

Intended Use

The JT5 is a self-contained horizontal directional drilling unit designed to install buried cable and pipe at 
distances to 150’ (45.7 m) depending on soil conditions and is intended for operation in ambient 
temperatures from 0° to 115°F (-18° to 46°C). Use in any other way is considered contrary to the intended 
use.

The JT5 can be used with Ditch Witch

®

 drilling fluid units and Ditch Witch locating equipment. It should be 

operated, serviced, and repaired only by persons familiar with its particular characteristics and acquainted 
with the relevant safety procedures.

Equipment Modification

This equipment was designed and built in accordance with applicable standards and regulations. 
Modification of equipment could mean that it will no longer meet regulations and may not function properly 
or in accordance with the operating instructions. Modification of equipment should only be made by 
competent personnel possessing knowledge of applicable standards, regulations, equipment design 
functionality/requirements and any required specialized testing.

Содержание JT5




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды