manualshive.com logo in svg

Ditch Witch JT5, Руководство оператора

Поделиться
Скачать
Ditch Witch JT5 Скачать руководство пользователя страница 18

JT5 Operator’s Manual

Safety - 17

Safety Alert Classifications

CMW

®

Safety Alert Classifications

These classifications and the icons defined on the following pages work together to alert you to situations 
which could be harmful to you, jobsite bystanders or your equipment. When you see these words and 
icons in the book or on the machine, carefully read and follow all instructions. YOUR SAFETY IS AT 
STAKE.

Watch for the three safety alert levels: 

DANGER

, 

WARNING

 and 

CAUTION

. Learn what each level 

means.

indicates a hazardous situation that, if not avoided, will result in death or serious injury. This 

signal word is to be limited to the most extreme situations.

indicates a hazardous situation that, if not avoided, could result in death or serious injury.

indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

Watch for two other words: 

NOTICE

 and 

IMPORTANT

.

NOTICE

 indicates information considered important, but not hazard-related (e.g., messages relating to 

property damage). 

IMPORTANT

 can help you do a better job or make your job easier in some way.

Содержание JT5




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды